Category: Comware


Comware CLI for STP edge on two 7500 ports in different VLANs. Read the Warning in the CLI, if you do it on a port between switches.. bad juju... Terminal is an end-point, PC, Server, etc.. stp edged-port enable # Warning: Edge port should only be connected to terminal. It will cause temporary ... Read More
April 1, 2014Praveen Bahethi


Dynamic Host Configuration Protocol (DHCP) relay on Comware is configured with concept of multiple DHCP servers and applied to the interfaces.  This configuration allows for added information to allow scale, but is ungainly when you have one or two DHCP servers. In the end, the configuration requirements are straight forward ... Read More
March 30, 2014Praveen Bahethi


Virtual Router Redundancy Protocol provides end devices alternate default gateways without having to be configured for them. With VRRP, a end device continues to speak to the same MAC Address discovered during ARP resolution, because of the Virtual IP (VIP) configuration in VRRP. Configuring VRRP requires knowledge of the Layer 2 ... Read More
March 28, 2014Praveen Bahethi